Finding the air leak in Sleep Number® beds - AirBed Pros
We do not sell the Sleep Number® or Select Comfort® SleepiQ® brand products and the information here in this blog is for adaptability of our air bed parts to theirs only. We are in No Way affiliated with the Select Comfort Corp.
You can begin by unzipping your mattress, fold back the top cover and foam comfort layers to see the air chambers. Remove the foam rail at the hard, you will see the air connections.
If your air leak is on one side, begin by removing the air lines, and switching the sides. By doing this, you will be able to see if the air leak moves.
If your air leak follows the hose you moved, it will most likely be the Pump Hose Connector or the pump itself. If the air leak does not move, it is most likely the air chamber fitting, o-ring, or air chamber may have a pin hole in the canvas area.
Begin inspecting the connectors to see if they have any signs of cracks at the hose or under the o-ring area. The o-ring should be on the air chamber nipple, but can break off inside the push button connector on the pump hose when the hose is removed.
If you find no leaks there, Listen for and air that may be leaking by listening closely to the pump and air hoses, and the air chambers themselves.
Once you find the air leak in your Sleep Number® Bed, we can help you fix it with our wide selection of air bed parts.
Replacing your leaking or broken Sleep Number® Bed Pump
If you have a leaking or broken Sleep Number® bed pump, consider replacing it with the AIRPRO pumps. We offer easy to use adaptor hoses that you can use to connect our air bed pumps to your air chambers, allowing you to control the air pressure again.
You will need to know if you have 1 hose going to each air chamber or 2.
If you have 1 hose going to each air chamber, for a total of 2 hoses on your Sleep Number® bed pump, you have the most popular style of Sleep Number® bed pump. - Use the AIRPRO Pump to Single Port Sleep Number® Bed Air Chamber Adaptor Hoses.
You will need to cut the hoses off of your Sleep Number® bed pump and push the barbed end of the adaptor hoses into your hoses and you will be able to attach AIRPRO Pumps to your Single port Sleep Number® bed air chambers.
If you have 2 hoses going to each air chamber for a total of [4 hoses on your Sleep Number® Bed Air Chamber] you will need F-CAM with Y Adaptors to convert your Dual Port Sleep Number Bed Air Chambers to AIRPRO Pumps.
- We do not sell the Sleep Number® or Select Comfort® SleepiQ® brand products, and we are in no way affiliated with the select comfort corp. The use of the trademarked names is for adaptability purposes only.
